Enterprise News
Silicone products and detailed technical parameters
2015-05-08 10:52:23

The rate of silicon rubber vulcanizing agent. Silicone rubber is a two-component silicone rubberis the most common, when a silicon rubber is not colloid and curing agent in two parts, when using mixed evenly according to a certain proportion can operate. Generally only need to consider the colloidal weight, special circumstances need to consider other additives of silica gelweight. For example, when using silica gel pad curing agent according to the proportion of the total weight of silicone and silicone oils added to calculate. C-8E (curing agent) silicone curing agent a clear gel, for moulding vulcanization molding of silicone products, used for transparent,translucent, high quality products, but also products applicable to ordinary silica processing.

C-14 food grade tasteless vulcanizator C-14 is the company's newly developed an odorless type vulcanizing agent, for moulding vulcanization molding of silicone products. Use in products, high quality, especially suitable for the production of silicone products. Apply to non-ferrous andtransparent, white products, C-14 a plus sulfur can be tasteless. Two vulcanization better (160 DEG C; 20 minutes). The flammable mixture of silicone products, please add two kg ofvulcanized silicone crosslinking agent with the same proportion of mixing agent, and then quickly add the remainder of raw materials, in order to avoid the fire.

C-15E environmental protection curing agent C-15E is a kind of transparent colloidalenvironment-friendly anti yellowing vulcanizing agent, for moulding vulcanization molding of silicone products. Use in products, high quality products, also apply to the general processing ofsilica gel. For transparent or white, can be guaranteed within four times (or less than two sulfidesulfide 200 degrees bake for 1-2 hours), the same yellow silicone products.

C-20E anti yellowing vulcanizing agent C-20E is a translucent colloidal silica anti yellowing vulcanizing agent, for moulding vulcanization molding of silicone products. Use in products, high quality, and is also suitable for general silicone products processing. For transparent or white,can be guaranteed within five times (or less than two sulfide sulfide 200 DEG C for 4 hours,baking products) yellowing for colored pieces against yellow coloured pieces, can ensurerepeatedly after curing, no discoloration.

Y-21 silicone rubber shrink agent the product can reduce the size of silicone products in high temperature silicone rubber, silicone rubber properties without affecting other aspects (such as:yellowing, mechanical properties etc.). At the same time, add this product easily scattered, notwhite, widely used in silicone rubber keypads, seals and other miscellaneous products. Two fourdouble curing agent anti yellow Xinghao products, high transparency, add less: spray frost less,low odor, suitable for the production of high transparent extrusion products.

H-10 silicone rubber release agent additive in this product is dedicated to high temperature vulcanized silicone rubber release, adding a small amount of the goods can be easily dispersed,greatly improve the yield increase, and fully guarantee the quality of silicone products. Silicone products, the products are widely used in the complex shape of the button.